Vibration and Shock Testing

Austest Laboratories provides accredited vibration and shock testing in our Adelaide, Sydney and Melbourne facilities covering sine, random, sine on random, random on sine, shock and SRS from small components to 19 inch rack based products for the Railway, Automotive, Military, Transport and Packaging Industries.

Vibration and Shock Tables (Sydney, Melbourne, Adelaide);

  • Vibration – up to 60 kN
  • Shock – 120 kN
  • 1 Hz to 3 kHz
  • Max. Velocity 180 cm/s
  • Max. Acceleration 100 g
  • Max. Displacement 75 mm

Large Shock Machine;

  • Max Specimen Weight: 1,150 kgs
  • Max Specimen Size: Length: 1.52 metres, Width:1.52 metres, Height: No Restriction
  • Max Acceleration in G’s: 600 (Bare Table)
  • Generated waveforms fully programmable and comply with typical military specifications including MIL-STD-202, MIL-STD-750, MIL-STD-810 and MIL-STD-883 and include Half Sine, Terminal Peak Sawtooth, Square Wave.

Small Shock Machine;

  • Max Specimen Weight: 100 kgs
  • Max Specimen Size 40cm x 40 cm, Height: No Restriction
  • Max Acceleration in G’s: 3 to 30,000 (Bare Table)
  • Generated waveforms fully programmable and comply with typical military specifications including MIL-STD-202, MIL-STD-750, MIL-STD-810 and MIL-STD-883 and include Half Sine, Terminal Peak Sawtooth, Square Wave.

The following Vibration and Shock standards are covered, including any customer specific requirements that fall within our test capabilities;

SRS Shock testing in accordance with RAN Naval Technical Bureau (NTB) specifications.

IEC/EN 61373:2010;

IEC/EN 50155:2007;

  • Test 12.2.11 Vibration, Shock and Bump

IEC/EN/AS 60068-2-6; Vibration

IEC/EN/AS 60068-2-27; Shock

IEC/EN/AS 60068-2-64; Vibration

MIL-STD-202G:

  • method 201A Vibration
  • method 204D Vibration, High Frequency
  • method 213B Shock
  • method 214A Random Vibration

MIL-STD-167-1A:

  • type 1, Environmental

MIL-STD-167-1 (ships):

  • type 1, Environmental

MIL-STD-810G:

  • method 514.6 Vibration
  • method 516.6 Shock

MIL-STD-883

ISTA 3A

  • test blocks 3,4,6-9

ISTA 2A

  • test blocks 4-6

ASTM D4169-09;

ASTM D4728-01;

IEC60255-21-1 Ed.1;

IEC60255-21-2 Ed.1;

ISO 16750-3:2012;

DEF STAN 00-35:2006:

  • test M1 Basic Vibration
  • test M2 Complete Store Vibration
  • test M3 Basic Pulse Shock
  • test M6 Operational Shock Simulation
  • test M12 Bump